Mission Data. Delivered Without Compromise.
TheSkyScout 2+ is an American-built, operator-tested UAV system designed for rapid employment, hot-swappable sensors, and mission-ready performance in contested, austere, and GPS-limited environments. Engineered, assembled, and supported in the United States, it provides secure data collection, adaptability, and tactical reliability for government, defense, and public-sector ISR and mapping missions.
Designed for Rapid Employment
Fully deployable in under three minutes.
Hot-Swappable Sensors
Seamlessly switch between EO/IR (Gremsy Vio), LiDAR, and mapping payloads (Sony LR1) without powering down.
Defense-Ready Compliance
NDAA 848 & 817 compliant and in final Blue UAS listing review.
When data integrity and uptime define mission success.
Government and defense operators face real operational limits in the field:
- Systems that are heavy, complex, or slow to deploy.
- EMI and spectrum congestion near radar, comms towers, and power systems.
- Heat load and environmental stresses that degrade components over time.
- Multi-sensor missions requiring multiple airframes.
- Supply-chain vulnerabilities and non-compliant foreign components.
The SkyScout 2+ eliminates these constraints with American-built engineering designed for tactical readiness and field longevity.
Engineered for Tactical Readiness, Built for Real-World Missions.
The SkyScout 2+ blends compact, mission-ready design with American manufacturing, advanced payload flexibility, and electromagnetic resilience which provide dependable ISR, mapping, and reconnaissance capabilities when teams cannot afford failure.
- SignalShield™ EMI Protection
Advanced EMI shielding protects critical avionics from electromagnetic interference allowing operators to safely fly closer to power lines, cell towers, and other sources without compromising control, reliability, or data integrity. - RTK Geotagging Precision
Centimeter-level accuracy enables ISR, terrain modeling, and mission documentation, even in dense forest, mountainous terrain, or tropical-storm wind conditions. - Integrated Passive + Active Cooling
Dual cooling systems stabilize component performance during sustained missions and extend hardware life in harsh environments. - Hot-Swappable Payload Architecture
Field operators can change sensors in under a minute which enables rapid transitions between ISR, LiDAR, photogrammetry, and mapping missions including Vio and LR1 configurations. - Compact, Operator-Carried System
This lightweight configuration supports rapid movement for dismounted, vehicle-borne, and expeditionary teams. - SkyBoss Smart Controller
A 2,000-nit daylight-readable display, precision dual-wheel inputs, active cooling, and hot-swappable batteries ensure reliable command in all conditions.
Field Challenges Solved
Real issues. Proven engineering responses.
SignalShield™ absorbs EMI for uninterrupted data transmission near power lines, radar systems, and communications towers to deliver uninterrupted command & data links in high-EMI zones.
Dual passive/active cooling stabilizes internal temperatures under load for consistent mission performance.
Hot-Swap Payload System supports EO/IR (Gremsy Vio), LiDAR, and mapping (Sony LR1) without extra airframes including Vio and LR1 payloads.
RTK geotagging secures centimeter-grade accuracy across uneven ground and dense canopy.
Backpack-portable; deployable by a single operator in minutes.
Get In Touch
Ready to take your operations to the next level?
Application Examples
ISR & Reconnaissance (EO/IR Payloads)
Long-range visual/thermal collection, target detection, and persistent surveillance for mobile teams using the SkyScout 2+ with the Gremsy Vio.
Mapping & Terrain Analysis (RTK + Photogrammetry)
High-precision terrain data for mission planning, route analysis, overwatch, and documentation featuring— including Sony LR1 photogrammetry support.
Infrastructure Inspection (LiDAR-Ready Configuration)
Accurate structural capture for power, bridge, telecom, and critical-infrastructure sites using LiDAR payloads.
Contingency & Expeditionary Operations
Easy portability, rapid employment, and adaptable payloads for austere, maritime, and forward environments.
Benefits / Outcomes
Mission-Ready
Fast deployment, minimal setup, and consistent flight performance.
Adaptable
Fast deployment, minimal setup, and consistent flight performance. Hot-swappable payloads cover ISR, mapping, LiDAR, and future SIGINT/EW modules, compatible with the Gremsy Vio and Sony LR1.
Operator-Tested
Built with field feedback from real teams in operational environments.
Secure & Compliant
NDAA-aligned build with verifiable domestic supply chain.
American-Made
Designed, assembled, and supported in Mississippi with U.S. warehouse and parts logistics.
Field-Validated Performance
Upcoming case studies will detail how government and public-sector teams deploy the SkyScout 2+ for ISR, mapping, and infrastructure missions in real operational conditions.
T2UE
Licensed Surveyor
Walters Land Survey
Multicopter Warehouse customer
“A 5- or 10-acre track that used to take us all day to tie in the grades and get good control now takes about 20 minutes tops with the WISPR SkyScout instead of eight hours. I’ll make that trade all day. I could have 10 guys out there shooting the same track all day long and still never get the detail I get with the SkyScout drone.”
Sean Muldoon
Frontier Precision
What is your favorite thing about the new SkyScout 2?
“Super excited about the new SkyScout 2. I would have to say the obstacle avoidance — that’s a big ask for a lot of our customers to give them situational awareness and security when flying. The upgraded motors allow for higher lift capacity so we can start integrating more payloads like the Surveyor Ultra onto it. And then the heating and cooling ability — again, giving you security while out flying in hot and cold environments.”
Brett Gardner
gNext Labs
What is your favorite thing about the new SkyScout 2?
“It has got to be by far the active cooling system. We have so many customers that are out in that heat, and we know what that does to batteries. That’s going to do nothing but improve efficiency and keep this up capturing more data — that’s going to end up in gNext.”
Larry Donaldson
InTerra
What is your favorite thing about the new SkyScout 2?
“We really like its sleek new features — a lot of new things it has — but what we really enjoy is the ability for it to collect data so quickly, so efficiently, and so accurately.”
Process
Schedule a Demo
Meet with the WISPR Systems team and experience the SkyScout 2+ in action.
Configure Your System
Select payloads, compliance options, and mission specific configurations.
Deploy and Decide
Execute with confidence — American-built reliability backed by on-demand support.
Precision. Power. Proof.
Built for operators who cannot afford failure.