WISPr Systems' Drones
WISPr Systems commercial drones are designed to carry a customer premise equipment (CPE) antenna and power the CPE to complete a site survey. We support Cambium and Ubiquiti antennas. The traditional site surveying method of using a bucket truck or climbing on a ladders and roofs to manually surveying can take a lot of time and effort that can be cut out using WISPr Systems’ drones. Our drones do all the heavy lifting for you!
WISPr POGO site survey drone
|Regular Sale Price||$2,500|
|Special Introductory Sale Price||$1,950|
|Max. Payload Stability Wind Rating||20mph
|Flight Time with payload||15min|
|Capable of carrying a 300mm dish?||Yes|
|Capable of carrying a 400mm dish?||No|
|Built in 24 Volt POE port?||Yes|
|Location to mount CPE?||Yes|
|Standard Warranty||90 days|
|Long-Range Wi-Fi Dongle||Included|
|Battery Charger||Not included|
|Software Services Charge||$200/month|
Ready to buy our drone?
WISPr Systems commercial drones. Engineered to autonomously complete site surveys for CPE and tower installs.
Long range antennas built on the drone will insure the user will always stay connected to the drone no matter the distance. 2 - 5 dbi antennas allow the drone's access point to have all the signal strength needed to stay connected to your laptop or tablet while flying. The access point on the drone can also switch from 2.4GHz to 5GHz depending on what frequency you are wanting to test with while flying to prevent signals overlapping while testing.
The image of the antennas on the POGO.
To survey with a CPE, the CPE must have power! Our drones are equipped with 24V power over ethernet (POE) port to power the CPE. The port also allows our WISPr OS software to operate the drone and communicate with the CPE.
The image shows the POE port on the drone.
Female USB port on the drone is used to connect to a spectrum analyzer to allow the user to connect a RF Explorer to our drone and spectrum analyze.
The image show the female USB port on the POGO.
The first person view camera comes pre-installed on all WISPr Systems' drones to give the user a 1080p birds-eye view from drone during flight.
The image shows the first person view camera.
WISPr Systems drones are have mounts for CPE antennas built in. The Pogo has the undercarriage space to carry a 12" CPE.
The drone needs to have undercarriage space to mount the CPE. Most CPE are around 6.4"-16", so having the appropriate undercarriage space is critical to flying with the CPE.
The image shows an example of the undercarriage space on the landing gear.
WISPr Systems' drones are specifically engineered to manage the payload of CPE antennas in moderate to high winds. POGO's maximum payload is a 5lbs CPE antenna in 20MPH winds.
The maximum payloads is calculated with 15lb added to the payload calculation. This allows for some cushion room when flying in high winds, which compensates for wind-load on the CPE antenna. The convex and concave surface area of a CPE antenna introduces additional wind drag on the drone, creating 10lbs of added payload per 10MPH wind-load.
This image shows an example of the surface area introducing the wind drag.